CCNA Training Institute in Chennai

CCNA Certification is one of the most evergreen IT certifications in the hardware and networking field around the world. More than million certified CCNA professionals are in the market and working in hardware and networking field since it was first introduced in 1998. The most important job of the certified networking professional is to install and configure networking infrastructure to keep pace with ever-changing business requirements. CCNA course in Chennai offered at ALCE, will equip the students to install, operate, configure and verify an IPv4 and IPv6 network, including configuring a LAN switch, configuring an IP router, connecting to a WAN, and identifying basic security threats in the network.
Cisco CCNA Certification is expected by most of the employers if you are working in the network industry. Now, networks are evolving into more complex, where advanced devices, systems, and Cisco technologies are used to streamline and safeguard the hardware and networking infrastructure. As leading CCNA Training Center in Chennai,ALCE Cisco training will assist you to sharpen your skills in hardware and networking concepts. With our CCNA Training, individuals can get professional training on installing, configuring and maintaining Cisco networks to exhibit productivity, minimize network errors and improve your technical skills. Improve, speed and quality of the networking components and Get the expertise required to build effective infrastructure through optimal network utilization.


Why CCNA Certification In Chennai?

Cisco certification in Chennai is a process that creates more benefits for employers and employees in the IT industry. Many candidates have faced positive changes in their career graphs after acquiring the CCNA Certification in Chennai. This certification process helps them achieve some real benefits and valuable skills. There are numerous benefits wherein IT professionals have felt the necessity of having a CCNA certificate – even after having more number of years of experience in the IT field. So candidates join in ALCE for Cisco certification courses in Chennai.


CCNA/CCNP Course Syllabus

Networking concepts

  • Components of network – router, switch, hub, bridge etc
  • Types of Network – LAN, MAN, WAN, VPN, PAN & Content Network
  • Defining Network requirements – NIC- Ethernet (CSMA/CD)
  • 10/100/1000 mbps DUPLEX (Half/Full/Auto) – Connecting Media – Coax.
  • 10 base 2T – UTP/STP – CAT 1/2/3..
  • Straight through/cross crimping (only details no practical)
  • Fiber optics – Single/Multimedia
  • 100 Base TX/FX etc – wireless communication.
  • Ethernet cabling Standard.
  • Connecting Devices
  • Repeater – Hub – Switch – Bridge – Topology – Bus/Star/Ring

OSI – Model

  • 7 Layers – Communication between the Layers (Encapsulation & De-encapsulation) – PDU.
  • Layer 2 – MAC/LLC – 802.3/802.2 (SAP/SNAP) /Ethernet II – Frames
  • Broadcast/Collision domain – point of -Hub/Switch/Router
  • L4 – 3way handshake – windowing – and about – Connectionless
  • Packet size [64B (mini) to 1518B (Max)]

TCP/IP Model & Ipv4 Addressing

  • All Layers of TCP/IP Compound with – OS
  • Application Layer – TFTP/FTP/SMTP/TELNET/SNMP/DNS
  • Transport Layer – TCP/UDP – TCP Segment Format
  • 3 way handshake/windowing – UDP segment Format
  • Internet Layer
  • IP datagram format – Protocol No. – TCP 6 – UDP 17
  • ICMP – ARP – RARP
  • Introduction to IP addressing – Class A/B/C/D/E
  • Private IP address – First OCTET range etc.

Subnetting

  • Default Subnet Mask
  • Class C Subnetting & Practice no. given
  • Class B Subnetting & problems
  • Class A Subnetting & problems

Introduction to IPV6

  • Introduction
  • Host Address Assignment
  • Unicast, Multicast and other Special ipV6 Addresses
  • Configuring ipV6 Routing and Routing Protocols
  • Translations between ipV4 and ipV6
  • Summary

Basic of Router & Configuration

  • Selection of Router & Cabling a Route
  • When Router used – LAN with WAN connect – to connect networks of different IP
  • Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
  • Cables used in different interfaces/purpose of interfaces
  • WAN interface cable – EIA/TIA – 232/449/530 – V.35 – X.21
  • Different CISCO series – modular/fixed – 10mbps/100 etc
  • Straight through between DTE & DCE

Different modes of operation & basic commands

  • Internal Components:
  • ROM – POST – BSL – ROM-MONITOR PRG – MINIIOS
  • Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
  • DRAM -Running Config
  • NVRAM – Startup Config
  • Flash MEM – IOS
  • Different Modes:
  • ROM Monitor – Reboot Mode – Setup – Exec Model
  • Exec Mode
  • User -Privilege – Global – Sub-configuration mode
  • Syntax/command to switch between modes
  • Assigning IP address for -E0-S0-S1
  • Enabling/disabling – console/privilege / vty password
  • Mold – command
  • Show Config / start / run / version / flash
  • Basic commands practice
  • Changing between modes – (user-privilege- Global-etc)
  • IP address configuration-E0-S0-S1
  • Password – enabling – encrypting it
  • Practice – motd – show commands – editing commands
  • Assigning host name (for Router)
  • Advanced Commands
  • Register value – X2102 – boot field value/purpose ROM monitor made – password breaking 8th/6th/13th bit of register value importance
  • Boot system flash/network/ROM – config-register (Changing register value) – etc command purpose Booting sequence – Backup & Recovery – CDP
  • Practice an above commands as well as following
  • Telnet – [ctrl+shift+6]x – disconnect – sh users /Sessions
  • Clear lines resume – [hostname resolving in telnet domain Enabling/disabling etc – no practical for this alone]
  • Overview of Cisco SDM (Security Device Manager)

IP Routing

  • IP Routing, Static Routing & Default Routing
  • IP routing – static routing – default- dynamic routing
  • Providing clock rate to up the link after identifying DCE by “Sh controllers” command
  • Commands/syntax – Static/default routing
  • Static Routing & Default Routing
  • Practical-session for Static & default routing
  • Dynamic Routing and RIP
  • Dynamic Routing – IGP & EGP.
  • IGP – RIP-OSPF – EGRP – EIGRP
  • Classes of Routing Protocol – Distance vector – Link State – Balanced hybrid
  • Role of Routing Protocol – builds/updates/selects & Routes the packet
  • Soluting for Routing loops – Max. loop count – split horizon – Route poison Reverse – Hold down Timer
  • Features of RIP – distance vector algorithm – RIP V1/V2 – load sharing – metric (depends – loop count)
  • Metric value depends – loop count – Ticks – delay – Reliability – cost – MTU – Bandwidth
  • Command – Router RIP Network
  • Sh IP route
  • Timer value for RIP– Update/Invalid/ hold down/flush Timer
  • RIP
  • Dynamic Routing – RIP Practical
  • Dynamic Routing EIGRP & OSPF
  • Limitations of distance vector algorithm
  • Features of EIGRP and its operations
  • Configuring EIGRP – “Auto-redistribution”
  • Verify and troubleshooting EIGRP
  • Features of OSPF and its operation
  • Configuring single area OSPF
  • Verify and troubleshoot OSPF
  • Access List
  • Purpose/advantage of Access-list
  • IP [-for a host – for a network/sub network].
  • Std IP access-list – wild card calculation
  • Extd IP access list
  • Switch port ACL,.
  • Step involved in creating access list
  • Applying access list at the interface – (inbound/outbound)
  • Named access-list for IP
  • Access-list in Telnet sessiont
  • IP standard Access List
  • Practical on
  • IP Std access-list
  • IP Extended Access List
  • IP Extd access-list, named access lists
  • NAT
  • Implement, Verify & Troubleshoot NAT
  • Explain the Basic Operation Of NAT
  • Using (including CLI/SDM)
  • Practicals on Static NAT, Dynamic NAT and PAT
  • Troubleshoot NAT issues
  • WAN Technologies
  • WAN Technologies- Leased Line
  • Leased line
  • P to P communication
  • HDLC & PPP protocol-features
  • Enabling HDLC & PPP
  • PPP Link
  • PPP layer & its explanation/role
  • PAP/CHAP role
  • Configuring PAP/CHAP using commands
  • VPN
  • Describe VPN technology
  • Importance Of VPN
  • Benefits & Role
  • Impact & Components
  • Frame-Relay
  • Packet Switched Network
  • Virtual circuit – DLCI – Access-link – CRI – FECN – BECN – LMI
  • Enabling Frame-relay
  • Inverse ARP
  • Configuring frame-relay for
  • Mesh Network
  • Star Network
  • Combination of above two
  • Switching
  • Switching Operation and Configuration
  • Function –add-learning / Forward-filters the Frame / loop avoidance
  • Redundant path and its problems
  • Spanning Tree Protocol – purpose – its different state (blocking/listening/learning/forwarding)
  • Modes of operation of switch/Bridge
  • Port duplexing
  • Switch & hub – half duplex
  • Switch & Server – full duplex
  • CISCO catalyst switch 1912 & 1924 interface details
  • M/K/I modes
  • Basic and advanced commands
  • Enabling & configuring MAC address table
  • VLAN Configuration
  • VLAN – ISL – Trunking
  • Enabling Trunking
  • Assigning VLAN No. & name
  • Configuring ports to a specific VLAN
  • VTP purpose
  • VTP domain
  • VTP modes of operation
  • Switching Technologies (including VTP , RSTP , PVSTP, 802.1q)
  • Implement Basic Switch Security (including Port Security , Trunk access .etc )
  • Wireless LAN
  • Wireless Intro & Operation
  • Standards associated with Wireless Media (including WI-FI Alliance, ITU/FCC)
  • Ad-hoc mode, infrastructure mode
  • SSID, BSS, ESS
  • Basic Parameters to configure on a Wireless Network
  • Wireless Security Feature’s (WEP, WPA 1 / 2 )
  • Implementing Wireless Networks

What Makes ALCE Unique?

  • We make candidates feel unique by providing practical knowledge to our candidates.
  • We offer special key features with more reliable and easy way for learning.
  • Our tutors at ALCE are dedicated to offer comprehensive skill and knowledge for each and every topic.


FAQs

Call now: +91 7867847855 and know the exciting offers available for you
  • Fully hands-on training
  • Learn by working on real-time projects
  • Flexible Timings – Weekday, Weekend & Fast-track
  • Certification guidance
  • Interview preparation
  • Tips and discussion to build your technical interview skills
  • Excel your knowledge with Affordable price in ALCE
  • More than 7+ Years of experience in AI Technologies.
  • Trainers are expert level and fully up-to-date in the subjects they teach because they continue to spend time working on real-world industry applications.
  • Trainers have Experienced on multiple real-time AI projects in their Industries.
  • Are working professionals working in multinational companies such as CTS, TCS, HCL Technologies, ZOHO, WIPRO.
  • Trained more than 2000+ Students in a year.
  • Strong Theoretical & Practical Knowledge.
  • Are certified Professionals with High Grade.
  • Are Well connected with Hiring HRs in multinational companies.
We at ALCE believe in giving individual attention to students so that they will be in a position to clarify all the doubts that arise in complex and difficult topics. Therefore, we restrict the size of each CCNA batch to 5 or 6 members at max or else if you need individual Training that also we provide at your flexible timing.
Our courseware is designed to give a hands-on approach to the students in CCNA. The course is made up of theoretical classes that teach the basics of each module followed by high-intensity practical sessions reflecting the current challenges and needs of the industry that will demand the students' time and commitment.
No worries. ALCE assure that no one misses single lectures topics. We will reschedule the classes as per your convenience within the stipulated course duration with all such possibilities. If required you can even attend that topic with any other batches.
ALCE provides many suitable modes of training to the students like
  • Classroom training
  • One to One training
  • Fast track training
  • Customized training
Yes, ALCE provides group discounts for its training programs. To get more details, visit our website and contact our support team via Call, Email, Live Chat option or drop a Quick Enquiry. Depending on the group size, we offer discounts as per the terms and conditions.
We accept all major kinds of payment options. Cash, GPay, Net Banking.
Please Contact +91 7867847855. Or you can share your queries through alcesupport@makeiton.com / learncompileexecute@gmail.com

Contact Us

No 147 1st Floor,NJK Avenue,
OMR,Sholinganallur,
Chennai 600119.

alcesupport@makeiton.com
learncompileexecute@gmail.com

+917867847855

Your message has been sent. Thank you!
Call US @ +91 7867847855
Mail US @ learncompileexecute@gmail.com
Online Enquery